Comparative Methods for Quantification of Sulfate-Reducing Bacteria in Environmental and Engineered Sludge Samples.

This study aimed to compare microscopic counting, culture, and quantitative or real-time PCR (qPCR) to quantify sulfate-reducing bacteria in environmental and engineered sludge samples. Four sets of primers that amplified the dsrA and apsA gene encoding the two key enzymes of the sulfate-reduction pathway were initially tested. qPCR standard curves were constructed using genomic DNA from an SRB suspension and dilutions of an enriched sulfate-reducing sludge. According to specificity and reproducibility, the DSR1F/RH3-dsr-R primer set ensured a good quantification based on dsrA gene amplification; however, it exhibited inconsistencies at low and high levels of SRB concentrations in environmental and sulfate-reducing sludge samples. Ultimately, we conducted a qPCR method normalized to dsrA gene copies, using a synthetic double-stranded DNA fragment as a calibrator. This method fulfilled all validation criteria and proved to be specific, accurate, and precise. The enumeration of metabolically active SRB populations through culture methods differed from dsrA gene copies but showed a plausible positive correlation. Conversely, microscopic counting had limitations due to distinguishing densely clustered organisms, impacting precision. Hence, this study proves that a qPCR-based method optimized with dsrA gene copies as a calibrator is a sensitive molecular tool for the absolute enumeration of SRB populations in engineered and environmental sludge samples.

Biodegradation of the emerging contaminant 3-nitro-1,2,4-triazol-5-one and its product 3-amino-1,2,4-triazol-5-one in perlite/soil columns.

3-Nitro-1,2,4-triazol-5-one (NTO) is an ingredient of new safer-to-handle military insensitive munitions formulations. NTO can be microbially reduced to 3-amino-1,2,4-triazol-5-one (ATO) under anaerobic conditions if an electron donor is available. Conversely, ATO can undergo aerobic biodegradation. Previously, our research group developed an anaerobic enrichment culture that reduces NTO to ATO. A second culture could aerobically mineralize ATO. This study aimed to combine anaerobic/aerobic conditions within a down-flow perlite/soil column for simultaneous NTO reduction and ATO oxidation. Acetate biostimulation was investigated to promote oxygen depletion and create anaerobic micro-niches for NTO reduction, whereas perlite increased soil porosity and oxygen convection, allowing ATO oxidation. Two columns packed with a perlite/soil mixture (70:30, wet wt.%) or 100% perlite were operated aerobically and inoculated with the NTO- and ATO-degrading cultures. Initially, the influent consisted of ∼280 µM ATO, and after 30 days, the feeding was switched to ∼260 µM NTO and ∼250 µM acetate. By progressively increasing acetate from 250 to 4000 µM, the NTO removal gradually improved in both columns. The perlite/soil column reached a 100% NTO removal after 4000 µM acetate was supplemented. Additionally, there was no ATO accumulation, and inorganic nitrogen was produced, indicating ATO mineralization. Although NH4+ was produced following ATO oxidation, most nitrogen was recovered as NO3- likely via nitrification reactions. Microbial community analysis revealed that phylotypes hosted in the enrichment cultures specialized in NTO reduction (e.g., Geobacter) and ATO oxidation (e.g., Hydrogenophaga, Ramlibacter, Terrimonas, and Pseudomonas) were established in the columns. Besides, the predominant genera (Azohydromonas, Zoogloea, and Azospirillum) are linked to nitrogen cycling by performing nitrogen fixation, NO3- reduction, and nitroaromatics degradation. This study applied a bulking agent (perlite) and acetate biostimulation to achieve simultaneous NTO reduction and ATO oxidation in a single column. Such a strategy can assist with real-world applications of NTO and ATO biodegradation mechanisms.

Treatment of the insensitive munitions compound, 3-nitro-1,2,4-triazol-5-one (NTO), in flow-through columns packed with zero-valent iron.

The need for effective technologies to remediate the insensitive munitions compound 3-nitro-1,2,4-triazol-5-one (NTO) is emerging due to the increasing use by the US Army and environmental concerns about the toxicity and aqueous mobility of NTO. Reductive treatment is essential for the complete degradation of NTO to environmentally safe products. The objective of this study is to investigate the feasibility of applying zero-valent iron (ZVI) in a continuous-flow packed bed reactor as an effective NTO remediation technology. The ZVI-packed columns treated an acidic influent (pH 3.0) or a circumneutral influent (pH 6.0) for 6 months (ca. 11,000 pore volumes, PVs). Both columns effectively reduced NTO to the amine product, 3-amino-1,2,4-triazol-5-one (ATO). The column treating the pH-3.0 influent exhibited prolonged longevity in reducing NTO, treating 11-fold more PVs than the column treating pH-6.0 influent until the breakthrough point (defined as when 85% of NTO was removed). The exhausted columns (defined as when only 10% of NTO was removed) regained the NTO reducing capacity by reactivation using 1 M HCl, fully removing NTO. After the experiment, solid-phase analysis of the packed-bed material showed that ZVI was oxidized to iron (oxyhydr)oxide minerals such as magnetite, lepidocrocite, and goethite during NTO treatment. This is the first report on the reduction of NTO and the concomitant oxidation of ZVI in continuous-flow column experiments. The evidence indicates that treatment in a ZVI-packed bed reactor is an effective approach for the removal of NTO.

Antimony toxicity upon microorganisms from aerobic and anaerobic environments.

Antimony (Sb) is a toxic and carcinogenic metalloid that can be present in contaminated water generated by mining operations and other industrial activities. The toxicity of Sb (III) and Sb (V) to aerobic microorganisms remains limited and unexplored for anaerobic microorganisms involved in hydrogen (H2) and methane (CH4) production. This study aimed to evaluate the toxicity of Sb (III) and Sb (V) upon aerobic and anaerobic microorganisms important in biological wastewater treatment systems. Sb (III) was more toxic than Sb (V) independently of the test and environment evaluated. Under aerobic conditions maintained in the Microtox assay, Sb (V) was not toxic to Allivibrio fischeri at concentrations as high as 500 mg/L, whereas Sb (III) caused just over 50% inhibition at concentration of 250 mg/L after 5 min of exposure. In the respirometry test, for the specific oxygen uptake rate, the concentrations of Sb (III) and Sb (V) displaying 50% inhibition were 0.09 and 56.2 mg/L, respectively. Under anaerobic conditions, exposure to Sb (III) and Sb (V) led to a decrease in microorganisms activity of fermentative and methanogenic processes. The results confirm that the microbial toxicity of Sb depends on its speciation and Sb (III) displays a significantly higher inhibitory potential than Sb (V) in both aerobic and anaerobic environments.

Treatment of acid rock drainage using a sulphate-reducing bioreactor with a limestone precolumn.

Sulphate reducing bacteria (SRB) offer promise for the treatment of mine waste due to their effectiveness removing toxic heavy metals as highly insoluble metal sulphides and their ability to generate alkalinity. The main objective of this study was to develop a treatment composed of a sulphate-reducing bioreactor with a limestone precolumn for the removal of Cu(II) from a synthetic ARD. The purpose of the limestone column was to increase the pH values and decrease the level of Cu in the effluent to prevent SRB inhibition. The system was fed with a pH-2.7 synthetic ARD containing Cu(II) (10-40 mg/L), sulphate (2000 mg/L) and acetate (2.5 g COD/L) for 150 days. Copper removal efficiencies in the two-stage system were very high (95-99%), with a final concentration of 0.53 mg/L Cu, and almost complete removal occurred in the limestone precolumn. In the same manner, the acidity of the synthetic ARD was effectively reduced in the limestone precolumn to 7.3 and the pH was raised in the bioreactor (7.3-8.0). COD consumption by methanogens was predominant from day 0-118, but SRB dominated at the end of the experiment (day 150) when the average COD removal and sulphide production were 74.8% and 61.7%, respectively. Study of the microbial taxonomic composition in the bioreactor revealed that Methanosarcina and Methanosaeta were the most prevalent methanogens while the genera Desulfotomaculum and Syntrophobacter were the dominant SRB. Among the SRB identified Desulfotomaculum intricatum (99% identity) and Desulfotomaculum acetoxidans (96%) were the most abundant sequences of bacteria capable of using acetate.

Elucidating the mechanisms associated with the anaerobic biotransformation of the emerging contaminant nitroguanidine.

Nitroguanidine (NQ) is a constituent of gas generators for automobile airbags, smokeless pyrotechnics, insecticides, propellants, and new insensitive munitions formulations applied by the military. During its manufacture and use, NQ can easily spread in soils, ground, and surface waters due to its high aqueous solubility. Very little is known about the microbial biotransformation of NQ. This study aimed to elucidate important mechanisms operating during NQ anaerobic biotransformation. To achieve this goal, we developed an anaerobic enrichment culture able to reduce NQ to nitrosoguanidine (NsoQ), which was further abiotically transformed to cyanamide. Effective electron donors for NQ biotransformation were lactate and, to a lesser extent, pyruvate. The results demonstrate that the enrichment process selected a sulfate-reducing culture that utilized lactate as its electron donor and sulfate as its electron acceptor while competing with NQ as an electron sink. A unique property of the culture was its requirement for exogenous nitrogen (e.g., from yeast extract or NH4Cl) for NQ biotransformation since NQ itself did not serve as a nitrogen source. The main phylogenetic groups associated with the NQ-reducing culture were sulfate-reducing and fermentative bacteria, namely Cupidesulfovibrio oxamicus (63.1% relative abundance), Dendrosporobacter spp. (12.0%), and Raoultibacter massiliens (10.9%). The molecular ecology results corresponded to measurable physiological properties of the most abundant members. The results establish the conditions for NQ anaerobic biotransformation and the microbial community associated with the process, improving our present comprehension of NQ environmental fate and assisting the development of NQ remediation strategies.

The key role of biogenic arsenic sulfides in the removal of soluble arsenic and propagation of arsenic mineralizing communities.

Biogeochemical processes govern the transport and availability of arsenic in sediments. However, little is known about the transition from indigenous communities to cultivable consortia when exposed to high arsenic concentrations. Such cultivable communities could be exploited for arsenic bioremediation of waste streams and polluted sites. Thus, it is crucial to understand the dynamics and selective pressures that shape the communities during the development of customized bacterial consortia. First, from the arsenic partitioning of two sediments with high arsenic concentrations, we found that up to 55% of arsenic was bioavailable because it was associated with the soluble, carbonate, and ionically exchangeable fractions. Next, we prepared sediment enrichment cultures under arsenate- and sulfate-reducing conditions to precipitate arsenic sulfide biominerals and analyze the communities. The produced biominerals were used as the inoculum to develop bacterial consortia via successive transfers. Tracking of the 16S rRNA gene in the fresh sediments, sediment enrichments, biogenic minerals, and bacterial consortia revealed differences in the bacterial communities. Removing the sediment caused a substantial decrease in diversity and shifts toward the dominance of the Firmicutes phylum to the detriment of Proteobacteria. In agreement with the 16S rRNA gene results, the sequencing of the arrA gene confirmed the presence of phylotypes closely related to Desulfosporosinus sp. Y5 (100% similarity), highlighting the pivotal role of this genus in the removal of soluble arsenic. Here, we demonstrated for the first time that besides being important as arsenic sinks, the biogenic arsenic sulfide minerals are reservoirs of arsenic resistant/respiring bacteria and can be used to culture them.

Biosynthesis and Analytical Characterization of Iron Oxide Nanobiocomposite for In-Depth Adsorption Strategy for the Removal of Toxic Metals from Drinking Water.

The biosynthesis of the iron oxide nanoparticles was done using Ixoro coccinea leaf extract, followed by the fabrication of iron oxide nanobiocomposites (I-Fe3O4-NBC) using chitosan biopolymer. Furthermore, the synthesized I-Fe3O4-NPs and I-Fe3O4-NBC were characterized, and I-Fe3O4-NBC was applied to remove toxic metals (TMs: Cd, Ni, and Pb) from water. The characterization study confirmed that the nanostructure, porous, rough, crystalline structure, and different functional groups of chitosan and I-Fe3O4-NPs in I-Fe3O4-NBCs showed their feasibility for the application as excellent adsorbents for quantitative removal of TMs. The batch mode strategy as feasibility testing was done to optimize different adsorption parameters (pH, concentrations of TMs, dose of I-Fe3O4-NBC, contact time, and temperature) for maximum removal of TMs from water by Fe3O4-NBC. The maximum adsorption capacities using nanocomposites for Cd, Ni, and Pb were 66.0, 60.0, and 66.4 mg g-1, respectively. The adsorption process follows the Freundlich isotherm model by I-Fe3O4-NBC to remove Cd and Ni, while the Pb may be adsorption followed by multilayer surface coverage. The proposed adsorption process was best fitted to follow pseudo-second-order kinetics and showed an exothermic, favorable, and spontaneous nature. In addition, the I-Fe3O4-NBC was applied to adsorption TMs from surface water (%recovery > 95%). Thus, it can be concluded that the proposed nanocomposite is most efficient in removing TMs from drinking water up to recommended permissible limit.

Reductive transformation of the insensitive munitions compound nitroguanidine by different iron-based reactive minerals.

Nitroguanidine (NQ) is an emerging contaminant being used by the military as a constituent of new insensitive munitions. NQ is also used in rocket propellants, smokeless pyrotechnics, and vehicle restraint systems. Its uncontrolled transformation in the environment can generate toxic and potentially mutagenic products, posing hazards that need to be remediated. NQ transformation has only been investigated to a limited extent. Thus, it is crucial to expand the narrow spectrum of NQ remediation strategies and understand its transformation pathways and end products. Iron-based reactive minerals should be investigated for NQ treatment because they are successfully used in existing technologies, such as permeable reactive barriers, for treating a wide range of organic pollutants. This study tested the ability of micron-sized zero-valent iron (m-ZVI), mackinawite, and commercial FeS, to transform NQ under anoxic conditions. NQ transformation followed pseudo-first-order kinetics. The reaction rate constants decreased as follows: commercial FeS > mackinawite > m-ZVI. For the assessed minerals, the NQ transformation started with the reduction of the nitro group forming nitrosoguanidine (NsoQ). Then, aminoguanidine (AQ) was accumulated during the reaction of NQ with m-ZVI, accounting for 86% of the nitrogen mass recovery. When NQ was reacted with commercial FeS, 45% and 20% of nitrogen were recovered as AQ and guanidine, respectively, after 24 h. Nonetheless, NsoQ persisted, contributing to the N-balance. When mackinawite was present, NsoQ disappeared, but AQ was not detected, and guanidine accounted for 11% of the nitrogen recovery. AQ was ultimately transformed into cyanamide, whose dimerization triggered the formation of cyanoguanidine. Alternatively, NsoQ was transformed into guanidine, which reacted with cyanamide to form biguanide. This is the first report systematically investigating the NQ transformation by different iron-based reactive minerals. The evidence indicates that these minerals are attractive alternatives for developing NQ remediation strategies.

Designing bacterial consortia for the complete biodegradation of insensitive munitions compounds in waste streams.

Insensitive munitions compounds (IMCs), such as 2,4-dinitroanisole (DNAN) and 3-nitro-1,2,4-triazol-5-one (NTO), are replacing conventional explosives in munitions formulations. Manufacture and use of IMCs generate waste streams in manufacturing plants and load/assemble/pack facilities. There is a lack of practical experience in executing biodegradation strategies to treat IMCs waste streams. This study establishes a proof-of-concept that bacterial consortia can be designed to mineralize IMCs and co-occurring nitroaromatics in waste streams. First, DNAN, 4-nitroanisole (4-NA), and 4-chloronitrobenzene (4-CNB) in a synthetic DNAN-manufacturing waste stream were biodegraded using an aerobic fluidized-bed reactor (FBR) inoculated with Nocardioides sp. JS 1661 (DNAN degrader), Rhodococcus sp. JS 3073 (4-NA degrader), and Comamonadaceae sp. LW1 (4-CNB degrader). No biodegradation was detected when the FBR was operated under anoxic conditions. Second, DNAN and NTO were biodegraded in a synthetic load/assemble/pack waste stream during a sequential treatment comprising: (i) aerobic DNAN biodegradation in the FBR; (ii) anaerobic NTO biotransformation to 3-amino-1,2,4-triazol-5-one (ATO) by an NTO-respiring enrichment; and (iii) aerobic ATO mineralization by an ATO-oxidizing enrichment. Complete biodegradation relied on switching redox conditions. The results provide the basis for designing consortia to treat mixtures of IMCs and related waste products by incorporating microbes with the required catabolic capabilities.

Quinone Moieties Link the Microbial Respiration of Natural Organic Matter to the Chemical Reduction of Diverse Nitroaromatic Compounds.

Insensitive munitions compounds (IMCs) are emerging nitroaromatic contaminants developed by the military as safer-to-handle alternatives to conventional explosives. Biotransformation of nitroaromatics via microbial respiration has only been reported for a limited number of substrates. Important soil microorganisms can respire natural organic matter (NOM) by reducing its quinone moieties to hydroquinones. Thus, we investigated the NOM respiration combined with the abiotic reduction of nitroaromatics by the hydroquinones formed. First, we established nitroaromatic concentration ranges that were nontoxic to the quinone respiration. Then, an enrichment culture dominated by Geobacter anodireducens could indirectly reduce a broad array of nitroaromatics by first respiring NOM components or the NOM surrogate anthraquinone-2,6-disulfonate (AQDS). Without quinones, no nitroaromatic tested was reduced except for the IMC 3-nitro-1,2,4-triazol-5-one (NTO). Thus, the quinone respiration expanded the spectrum of nitroaromatics susceptible to transformation. The system functioned with very low quinone concentrations because NOM was recycled by the nitroaromatic reduction. A metatranscriptomic analysis demonstrated that the microorganisms obtained energy from quinone or NTO reduction since respiratory genes were upregulated when AQDS or NTO was the electron acceptor. The results indicated microbial NOM respiration sustained by the nitroaromatic-dependent cycling of quinones. This process can be applied as a nitroaromatic remediation strategy, provided that a quinone pool is available for microorganisms.

Dynamics of Microbial Communities during the Removal of Copper and Zinc in a Sulfate-Reducing Bioreactor with a Limestone Pre-Column System.

Biological treatment using sulfate-reducing bacteria (SRB) is a promising approach to remediate acid rock drainage (ARD). Our purpose was to assess the performance of a sequential system consisting of a limestone bed filter followed by a sulfate-reducing bioreactor treating synthetic ARD for 375 days and to evaluate changes in microbial composition. The treatment system was effective in increasing the pH of the ARD from 2.7 to 7.5 and removed total Cu(II) and Zn(II) concentrations by up to 99.8% and 99.9%, respectively. The presence of sulfate in ARD promoted sulfidogenesis and changed the diversity and structure of the microbial communities. Methansarcina spp. was the most abundant amplicon sequence variant (ASV); however, methane production was not detected. Biodiversity indexes decreased over time with the bioreactor operation, whereas SRB abundance remained stable. Desulfobacteraceae, Desulfocurvus, Desulfobulbaceae and Desulfovibrio became more abundant, while Desulfuromonadales, Desulfotomaculum and Desulfobacca decreased. Geobacter and Syntrophobacter were enriched with bioreactor operation time. At the beginning, ASVs with relative abundance <2% represented 65% of the microbial community and 21% at the end of the study period. Thus, the results show that the microbial community gradually lost diversity while the treatment system was highly efficient in remediating ARD.

Fate of bis-(4-tert-butyl phenyl)-iodonium under photolithography relevant irradiation and the environmental risk properties of the formed photoproducts.

Aryl-iodonium salts are utilized as photoacid generators (PAGs) in semiconductor photolithography and other photo-initiated manufacturing processes. Despite their utilization and suspected toxicity, the fate of these compounds within the perimeter of semiconductor fabrication plants is inadequately understood; the identification of photolithography products is still needed for a comprehensive environmental impact assessment. This study investigated the photolytic transformation of a representative iodonium PAG cation, bis-(4-tert-butyl phenyl)-iodonium, under conditions simulating industrial photolithography. Under 254-nm irradiation, bis-(4-tert-butyl phenyl)-iodonium reacted rapidly with a photolytic half-life of 39.2 s; different counter ions or solvents did not impact the degradation kinetics. At a semiconductor photolithography-relevant UV dosage of 25 mJ cm-2, 33% of bis-(4-tert-butyl phenyl)-iodonium was estimated to be transformed. Six aromatic/hydrophobic photoproducts were identified utilizing a combination of HPLC-DAD and GC-MS. Selected photoproducts such as tert-butyl benzene and tert-butyl iodobenzene had remarkably higher acute microbial toxicity toward bacterium Aliivibrio fischeri compared to bis-(4-tert-butyl phenyl)-iodonium. Octanol-water partition coefficients estimated using the Estimation Programs Interface Suite™ indicated that the photoproducts were substantially more hydrophobic than the parent compound. The results fill a critical data gap hindering the environmental impact assessment of iodonium PAGs and provide clues on potential management strategies for both iodonium compounds and their photoproducts.

Analysis of hydrophilic per- and polyfluorinated sulfonates including trifluoromethanesulfonate using solid phase extraction and mixed-mode liquid chromatography-tandem mass spectrometry.

Ultra-hydrophilic per- and polyfluorinated sulfonates (PFSA) are increasingly scrutinized in recent years due to their ubiquitous occurrence, persistence, and aqueous mobility in the environment, yet analysis remains a challenge. This study developed methods for the analysis of trifluoromethanesulfonate, perfluorobutanesulfonate, 10-camphorsulfonate, and a di-fluorinated sulfonate utilizing mixed-mode liquid chromatography, where all analytes were adequately retained and separated. Chromatography and electrospray ionization parameters were optimized; instrumental limits of quantification for the anionic target analytes were in the range of 4.3 - 16.1 ng L-1. Solid phase extraction (SPE) methods were developed using Oasis WAX cartridges; SPE recoveries for the analytes ranged from 86% to 125%. Salinity and total organic carbon both impaired the SPE performance to different extents, depending on the respective analyte. Utilizing widely accessible instrumentation and materials, this is a single method to simultaneously analyze conceivably the most hydrophilic PFAS chemical, i.e., trifluoromethanesulfonate, and moderately hydrophobic PFSAs.

Iron(II) monosulfide (FeS) minerals reductively transform the insensitive munitions compounds 2,4-dinitroanisole (DNAN) and 3-nitro-1,2,4-triazol-5-one (NTO).

As military applications of the insensitive munitions compounds (IMCs) 2,4-dinitroanisole (DNAN) and 3-nitro-1,2,4-triazol-5-one (NTO) increase, there is a growing need to understand their environmental fate and to develop remediation strategies to mitigate their impacts. Iron (II) monosulfide (FeS) minerals are abundant in freshwater and marine sediments, marshes, and hydrothermal environments. This study shows that FeS solids can reduce DNAN and NTO to their corresponding amines under anoxic ambient conditions. The reactions between IMCs and the FeS minerals were surface-mediated since they did not occur when only dissolved Fe2+(aq) and S2-(aq) were present. Mackinawite, a tetragonal FeS with a layered structure, reduced DNAN mainly to 2-methoxy-5-nitroaniline (MENA), which in turn was partially reduced to 2-4-diaminoanisole (DAAN). The layered structure of mackinawite provided intercalation sites likely responsible for partial adsorption of MENA and DAAN. Mackinawite entirely reduced NTO to 3-amino-1,2,4-triazol-5-one (ATO). The reduction of IMCs showed concurrent oxidation of mackinawite to goethite and elemental sulfur. A commercial FeS product, composed mainly of pyrrhotite and troilite, reduced DNAN to DAAN and NTO to ATO. At pH 6.5, DNAN and NTO transformation rates were 667 and 912 µmol h-1 m-2, respectively, on the mackinawite surface and 417 and 1344 µmol h-1 m-2, respectively, on the commercial FeS surface. This is the first report of the reduction of a nitro-heterocyclic compound (NTO) by FeS minerals. The evidence indicates that DNAN and NTO can be rapidly transformed to their succeeding amines in anoxic subsurface environments and aquatic sediments rich in FeS minerals.

Aerobic biodegradation of emerging azole contaminants by return activated sludge and enrichment cultures.

Azoles are an emerging class of contaminants with a growing ubiquitous presence in the environment. This study investigates the aerobic microbial degradation of four azoles, pyrazole (PA), 1,2,4-triazole (TA), benzotriazole (BTA) and 5-methylbenzotriazole (5-MBTA), with return activated sludge and microbial enrichment cultures. Slow degradation of PA was observed in the presence of glucose and NH4+ with a peak degradation rate of 0.5 mg d-1 gVSS-1. TA was found to be highly persistent, with no significant degradation observed in 6-8 months under any incubation condition. In contrast, the benzotriazoles were readily degraded at faster rates in all incubation conditions. The degradation rates observed for BTA and 5-MBTA, when provided as the sole substrates, were 8.1 and 16.5 mg d-1 gVSS-1, respectively. Two enrichment cultures, one degrading BTA and the other degrading 5-MBTA, were developed from the activated sludge. Mass balance studies revealed complete mineralization of 5-MBTA and partial breakdown of BTA by the enrichment cultures. Nocardioides sp. and Pandoraea pnomenusa were the most abundant bacteria in the BTA and 5-MBTA degrading enrichment cultures, respectively. The research shows large differences in the biodegradability of various azoles, ranging from complete mineralization of 5-MBTA to complete persistence for TA.

Covalent binding with model quinone compounds unveils the environmental fate of the insensitive munitions reduced product 2,4-diaminoanisole (DAAN) under anoxic conditions.

2,4-Dinitroanisole (DNAN) is an insensitive munitions compound expected to replace 2,4,6-trinitrotoluene (TNT). The product of DNAN's reduction in the environment is 2,4-diaminoanisole (DAAN), a toxic and carcinogenic aromatic amine. DAAN is known to become irreversibly incorporated into soil natural organic matter (NOM) after DNAN's reduction. Herein, we investigate the reactions between DAAN and NOM under anoxic conditions, using 1,4-benzoquinone (BQ) and methoxybenzoquinone (MBQ) as model humic moieties of NOM. A new method stopped the fast reactions between DAAN and quinones, capturing the fleeting intermediates. We observed that DAAN incorporation into NOM (represented by BQ and MBQ models) is quinone-dependent and occurs via Michael addition, imine (Schiff-base) formation, and azo bond formation. After dimers are formed, incorporation reactions continue, resulting in trimers and tetramers. After 20 days, 56.4% of dissolved organic carbon from a mixture of DAAN (1 mM) and MBQ (3 mM) had precipitated, indicating an extensive polymerization, with DAAN becoming incorporated into high-molecular-weight humic-like compounds. The present work suggests a new approach for DNAN environmental remediation, in which DNAN anaerobic transformation can be coupled to the formation of non-extractable bound DAAN residues in soil organic matter. This process does not require aerobic conditions nor a specific catalyst.

Bacteria Make a Living Breathing the Nitroheterocyclic Insensitive Munitions Compound 3-Nitro-1,2,4-triazol-5-one (NTO).

The nitroheterocyclic 3-nitro-1,2,4-triazol-5-one (NTO) is an ingredient of insensitive explosives increasingly used by the military, becoming an emergent environmental pollutant. Cometabolic biotransformation of NTO occurs in mixed microbial cultures in soils and sludges with excess electron-donating substrates. Herein, we present the unusual energy-yielding metabolic process of NTO respiration, in which the NTO reduction to 3-amino-1,2,4-triazol-5-one (ATO) is linked to the anoxic acetate oxidation to CO2 by a culture enriched from municipal anaerobic digester sludge. Cell growth was observed simultaneously with NTO reduction, whereas the culture was unable to grow in the presence of acetate only. Extremely low concentrations (0.06 mg L-1) of the uncoupler carbonyl cyanide m-chlorophenyl hydrazone inhibited NTO reduction, indicating that the process was linked to respiration. The ultimate evidence of NTO respiration was adenosine triphosphate production due to simultaneous exposure to NTO and acetate. Metagenome sequencing revealed that the main microorganisms (and relative abundances) were Geobacter anodireducens (89.3%) and Thauera sp. (5.5%). This study is the first description of a nitroheterocyclic compound being reduced by anaerobic respiration, shedding light on creative microbial processes that enable bacteria to make a living reducing NTO.

Bioconcentration potential and microbial toxicity of onium cations in photoacid generators.

Despite the widespread utilization of onium salts as photoacid generators (PAGs) in semiconductor photolithography, their environmental, health, and safety (EHS) properties remain poorly understood. The present work reports the bioconcentration potential of five representative onium species (four sulfonium and one iodonium compound) by determining the octanol-water partition coefficient (POW) and lipid membrane affinity coefficient (KMA); microbial toxicity was evaluated using the bioluminescent bacterium Aliivibrio fischeri (Microtox bioassay). Four of the oniums exhibited varying degrees of hydrophobic (lipophilic) partitioning (log POW: 0.08-4.12; KMA: 1.70-5.62). A strong positive linear correlation was observed between log POW and KMA (KMA = log POW + 1.76, R2 = 0.99). The bioconcentration factors (log BCF) estimated from POW and KMA for the four oniums ranged from 0.13 to 3.67 L kg-1. Bis-(4-tert-butyl phenyl)-iodonium and triphenylsulfonium had 50% inhibitory concentrations (IC50) of 4.8 and 84.6 µM, whereas the IC50 values of the other three oniums were not determined because these values were higher than their aqueous solubility. Given the increased regulatory scrutiny regarding the use and potential health impacts from onium PAGs, this study fulfills critical knowledge gaps concerning the EHS properties of PAG oniums, enabling more comprehensive evaluation of their environmental impacts and potential risk management strategies.

Covalent bonding of aromatic amine daughter products of 2,4-dinitroanisole (DNAN) with model quinone compounds representing humus via nucleophilic addition.

2,4-Dinitroanisole (DNAN) is a component of insensitive munitions (IM), which are replacing traditional explosives due to their improved safety. Incomplete IM combustion releases DNAN onto the soil, where it can leach into the subsurface with rainwater, encounter anoxic conditions, and undergo (a)biotic reduction to aromatic amines 2-methoxy-5-nitroaniline (MENA), 4-methoxy-3-nitroaniline (iMENA, isomer of MENA), and 2,4-diaminoanisole (DAAN). We report here studies of nucleophilic addition mechanisms that may account for the sequestration of aromatic amine daughter products of DNAN into soil organic matter (humus), effectively removing these toxic compounds from the aqueous environment. Because quinones are important moieties in humus, we incubated MENA, iMENA, DAAN, and related analogs with model compounds 1,4-benzoquinone and 2,3-dimethyl-1,4-benzoquinone under anoxic conditions. Mass spectrometry and ultra-high performance liquid chromatography revealed that the aromatic amines had covalently bonded to either carbonyl carbons or ring carbons ß to carbonyl carbons of the quinones, producing a mixture of imines and Michael adducts, respectively. These products formed rapidly and accumulated in the one-to four-day incubations. Nucleophilic addition reactions, which do not require catalysis or oxic conditions, are proposed as a mechanism resulting in the binding of DNAN to soil observed in previous studies. To remediate sites contaminated with DNAN or other nitroaromatics, reducing conditions and humus amendments may promote their immobilization into the soil matrix.